TDS & VIDEOS of Machine printing silicone :HD silicone XG-866A ,Glossy silicone XG-399-3 & Matte silicone XG-866M
- Categories:TDS Download&Video
- Author:
- Origin:
- Time of issue:2020-03-13
- Views:23
TDS & VIDEOS of Machine printing silicone :HD silicone XG-866A ,Glossy silicone XG-399-3 & Matte silicone XG-866M
(Summary description)How to get silicone HD glossy and HD matte effect by XG silicone ink To get 3D HD SILICONE glossy and matte effect we should get below machine : To get 3D HD SILICONE glossy and matte effect we should get below silicone materals : HD silicone
- Categories:TDS Download&Video
- Author:
- Origin:
- Time of issue:2020-03-13
- Views:23
How to get silicone HD glossy and HD matte effect by XG silicone inkTo get 3D HD SILICONE glossy and matte effect we should get below machine :

printing table with moving dryer for XG silicone

Oval printing machine for XG silicone
To get 3D HD SILICONE glossy and matte effect we should get below silicone materals :
HD silicone

HD silicone XG-866A

XG-silicone-ink-HD-silicone-XG-866A

XG silicone ink glossy silicone XG-399-3

XG silicone ink Matte silicone XG-866M

XG silicone ink pigments
XG-silicone-slow-dry-catalyst-XG-866B-1
HD silicone XG-866A Glossy silicone XG-399-3 Matte silicone XG-866M
Preparation:
-
Mesh&Squeegee: 120(48T) Mesh number ;65-75degree Squeegee.
-
: Pigments added ratio:For white and fluorescent color20%,other color 10%
-
Catalyst mixing ratio:2%slow dry XG-866B-1 and fast dry XG-866B-2can mix together for using.
-
Thinner XG-128A adding ratio:0-20%thinner is not necessary for hand printing
-
Heating Temp and time: Flash cure temp :100℃-120℃ for 6-10 seconds ,Drying temp :120℃-140℃ for about 2 -5 minutes.
Silicone ink printing tips:
1.HD silicone XG-866Afor under coating and high density printing for 2-8 times :
HD silicone XG-866A 60G
Fast dry catalyst XG-866B-2 1.2G 2% If machine printing to use slow dry catalyst.
Thinner XG-128AH thinner is not necessary for hand printing,5-20% is enough for machine printing. Cure by temp of 120℃ 6-10 seconds.
If fabric with hairy or want to get more smooth effect kindly assist by heat press machine or iron after first time printing. After printing keep wet to heat press by temp 150-170 degree for 10-20 seconds.
2.Color effect siliconeprinting for 3-4 times :
HD silicone XG-866A 0G
White color pigment XG-102 10G For white and fluorescent color 20%,other color 10%
3.Glossy silicone ink or matte silicone ink for top coating:
A, Glossy top coating for 1-2 times:
Glossy silicone ink XG-399-3 50G
Fast dry catalyst XG-866B-2 1G 2% It will be better to use slow dry catalyst XG-866B-1 and fast dry half and half. If for machine printing to use slow dry catalyst.
Thinner XG-128AH thinner is not necessary for hand printing,5-10% is enough for machine printing. Cure by temp of 100-110℃ 10-25 seconds Have to get silicone bubbles out first ,try to use code wind to support and it will be better to use low temp by longer heating time.
XG SILICONE INK HD glossy and HD matte effect printing process videos:
Scan the QR code to read on your phone
Y i Run Silicone Co.,Ltd

Dongtaiheng Industrial Zone, Changbu, Xinxu Town, Huiyang District, Huizhou city, China

+86 752 3522837
Copyright © Y i Run Silicone Co.,Ltd. all rights reserved