XG Silicone
搜索
Search
Products

OUR PRODUCTS

Contact us

Dongtaiheng Industrial Zone, Changbu, Xinxu Town, Huiyang District, Huizhou city, China

+86 752 3522837

/
/
/
Manual Printing Silicone
High elastic nylon silicone ink XG-136AB

High elastic nylon silicone ink XG-136AB

Printing instruction
1.physical properties:transulent paste,mix ratio:1:1;printed on cotton,elastic garment,silicone coating garment,modal fibre etc;it can be silicone adhesive between two garments;extreme flexibility :400-500X.
2.Print instruction :
(1).underbase printing:mix ratio:1:1(XG-136A:XG-136B),mix them thoroughly.mesh:120(48T),squeege:65-75degree;print 2-3times,every print after surface dry by flash,100℃,10seconds,please print the silicone as silicone adhesive with mesh number 80;add viscosity reducer if the viscosity is high.(reducer:XG-128AH)

 

(2).printing thickness:please add pigment5-10% into silicone mixture  if you need color layer.Note:use the print-flash-print method.(100℃,10seconds by table oven or dryer)
(3).printing glossy or matte finish:print glossy silicone on uneven cloth;glossy silicone XG-399-3 with super fastness but general elongation.print high elastic cloth with XG-399Q(elongation strength 400-500X,general fastness).print XG-866M with matte effect.
3.After finishing print,put product into oven by 120℃,20minutes.please bake product by 30minutes if silicone layer is too thick.please do wash test or rub test in 24hours.
4.the instruction is our test for your reference.please do the test before mass production.when the test meets your requirement,you can start flocking with our product.
XG&YR Technical Department
Silicone Printing Ink for Shoes XG-866A-50

Silicone Printing Ink for Shoes XG-866A-50

Good wear resistance,fastness and washing test result ,easy for pigments,easy cure,easy to get high density effet ,suitable for shoes uppers printing.To print glossy or matte for top coating to get super glossy and matte effect.
Manual Printing High Density Silicone Ink XG-866AH

Manual Printing High Density Silicone Ink XG-866AH

Longer printing time.Good smooth for cotton and cotton blended fabrics ,easy for pigments ,easy cure,easy to get high density effet .To print glossy or matte for top coating to get super glossy and matte effect. Or adjust numbers of meshes, to get half matte effect.For under coating high density printing,color layer printing,CMYK printing.Can be used for mixing with elastic silicone XG-866A-LK or round silicone XG-866A-2Y for pulling stone printing.Good for both hand and machine printing,if for machine it wll be better to mix with 10% thinner.
Oval automatic Machine Printing Elastic Silicone Ink XG-866A-LK

Oval automatic Machine Printing Elastic Silicone Ink XG-866A-LK

Excellent elastic and fastness with soft hand-feeling. for the fabrics and ribbons with high elastic for under coating or color layer printing,CMYK printing. To mix with HD silicone XG-866A 50% : 50% and thinner 20-30% accord to these two silicone amount for pulling stone printing.
Heat transfer Silicone Ink XG-866A-2Y

Heat transfer Silicone Ink XG-866A-2Y

For heat transfer printing ,mixing with glitter and other special effect powders effect,for sportswear under coating and color layer printing,with better fastness and elastic then HD silicone .Can mix with HD silicone together for printing to get longer printing time ,easy HD and smooth effect .To mix with thinner or HD silicone and thinner togehter for pulling stone & brush effect.
PRE
1

Y i Run Silicone Co.,Ltd

XG Silicone

Dongtaiheng Industrial Zone, Changbu, Xinxu Town, Huiyang District, Huizhou city, China

XG Silicone

 +86 752 3522837

XG Silicone

EU certification >

XG Silicone

Leave a message >

Please leave us a message!

Copyright © Y i Run Silicone Co.,Ltd. all rights reserved

Diglant